Graco Husky Metallic Double Diaphragm Pumps
A Graco Pump ATEX rated, has many applications including Food, General industry and the Motor industry.
Sizes and pump construction
- 3/4″ Aluminium or Stainless Steel
- 1″ Aluminium or Stainless Steel
- 1-1/2″ Aluminium or Stainless Steel
- 2″ Aluminium, Cast Iron or Stainless Steel
- 3″ Aluminium
There is a wide range of optional construction materials for internal Seats, Balls and Diaphragms to suit your applications, and are ATEX certified. Visit www.fluidequipmentservices.co.uk for more information
Maximum flow rates vary from 61 litres per minute for the 3/4″ pump to 1.041 litres per minute for the 3″ pump.
Effects of viscosity and suction lifts on flow rates
This is a very important factor when considering the use of a Double Diaphragm pump. Please see Al overleaf.
When to use Double Diaphragm pumps
Double Diaphragm pumps are designed for volume transfer applications and are usually unsuitable for very viscous products or where there are long pipe runs and high discharge heads to overcome.
FES can supply special pumps for working under these more difficult conditions. If you are unsure which is the best pump for your application, call us at FES.
Spares for both the air and the wetted side of the graco pumps are available in a variety of kits for convenience when servicing and replacing wearing parts in pumps.